TemBreak 2 - Exceeding Standards



 TemBreak 2 MCCB is the Ultimate Safety Breaker. It has specifications that exceed international safety standards. Direct opening action - recommended by IEC standards for machinery safety - is a feature of most models. A unique safety lock system for plug-in MCCBs ensures that the MCCB cannot carry current while being fitted or removed. 

SAFETY PLUS

TemBreak 2 MCCBs exceed the requirements of recognized standards. International Compliance

  • The TemBreak 2 MCCB complies with the international standard IEC 60947-2
  • TemBreak 2 Switch Disconnectors comply with IEC 60947-3

  • Accessories comply with IEC 60947-5-1 or IEC 61058-1
  • The entire range conforms to the IEC general rules for switchgear, IEC 60947-1
  • TemBreak 2 MCCBs comply with JIS C 8201-2-1 Ann.1
  • The TemBreak 2 range complies with the EC Low Voltage Directive and all models are CE marked
  • TemBreak 2 MCCBs carry the IEC symbol indicating Direct Opening Action as defined by IEC 60947-5-1. IEC 60204-1, Safety of Machinery - Electrical Equipment of Machines recommends that switches used for machinery have Direct Opening Action to minimize risk in the event of failure
INDEPENDENT TESTS

TemBreak 2 circuit breakers have been tested at independent laboratories as well as in Terasaki's own laboratory in Osaka, Japan. Copies of independent test reports are available on request. 

No alt text provided for this image

MARINE APPROVALS

TemBreak 2 MCCBs are approved by the leading marine approval organizations

No alt text provided for this image

To know more on the TemBreak2 Easy Selection Guide do follow the link below,



For more details on the various products offered by JIS Electric,
Visit: www.jiselectric.com

Comments

Post a Comment

Popular posts from this blog

VEGA - Streel Light Management

Image
  The photocells control lighting installation switch-on and switch-off in the function of the light level. The twilight switches are employed to automate the switch-on and switch-off time control for the lighting circuits according to the solar time for the zone in which they are installed. Economical savings in installation, maintenance, and consumption. The key advantage of using a twilight switch is the significant energy savings it provides, as well as the ease of eliminating unnecessary time scheduling and efficiently regulating sunlight. The  VEGA twilight switch  permits the controlling of premises depending on the prevailing light. The device compares the surrounding light with the adjusted level; if it is less than this level, it is activated after a delay time. When the light increases and reaches the switch-off level, it turns off after the delay time. On and Off switching control according to the luminosity level, is used in lighting installations such as sho...
Read more

Prevent fire hazard with Tele E1ZM10 12-240VAC/DC

Image
TELE's ENYA Series  E1ZM10 12-240VAC/DC  multi-function relay has 7-time functions with 7 different time ranges ranging from 0.05 seconds to 100 hours. The E1ZM10 12-240VAC/DC timing relay is designed for simple DIN-rail mounting and can be easily wired using the screw terminals.  Task: To prevent fire risk, the stove in a residential home's shared kitchen must be turned off after a set amount of time. In the event that the impact button is unlawfully blocked, the electrical circuit must still operate. Solution: A centralized impact button with a downstream time relais E1ZM10 12-240V and the feature "Single-shot leading edge with control input" solves the problem. When the button is pressed, the current flows and a given time window begins to run. Now is the time to use the stove before the time window has expired. The current is turned off and the stove is turned off audibly when the timer expires automatically. Only after the current cycle has finished can the next ...
Read more

WHAT IS RETROFIT CONCEPT ?

Image
                                          Throughout the world, there are many old, low-voltage circuit breakers protecting essential industrial processes that have been  operational for a significant period ‘beyond’  their functional design life. Obtaining spares for obsolete circuit breakers of this age can prove  to be impossible and replacing the entire switchboard can have a serious impact on production downtime and budget constraints.             Retrofitting refers to the addition of new technology to older systems. Retrofit ACBs can replace ageing, unsafe switches, and circuit breakers . Terasaki’s Retrofit Services                               Ageing switchgear often needs to be upgraded to meet modern operational and safety requirements. Retrofitting of...
Read more